Abstract
Experiments have been performed in a supersonic cascade facility to elucidate the fluid dynamic phenomena and loss mechanism of a strong shock-wave turbulent boundary layer interaction in a compressor cascade. The cascade geometry is typical for a transonic fan tip section that operates with a relative inlet Mach number of 1.5, a flow turning of about 3 deg, and a static pressure ratio of 2.15. The strong oblique and partly normal blade passage shock-wave with a preshock Mach number level of 1.42 to 1.52 induces a turbulent boundary layer separation on the blade suction surface. The free-stream Reynolds number based on chord length was about 2.7 × 106. Cascade overall performance, blade surface pressure distributions, Schlieren photographs, and surface visualizations are presented. Detailed Mach number and flow direction profiles of the interaction region (lambda shock) and the corresponding boundary layer have been determined using a Laser-2-Focus anemometer. The obtained results indicated that the axial blade passage stream sheet contraction (axial velocity density ratio) has a significant influence on the mechanism of strong interaction and the resulting total pressure losses.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
