Abstract
The influence of microwave pre-treatment on mineral ore breakage has been investigated. Samples of lead–zinc ore were microwave pre-treated prior to strength testing and change in strength with microwave exposure time determined. Comparisons of change in strength were made between microwave-treated and -untreated material. Using a multimode microwave cavity, it was found that strength could be significantly reduced in 0.5 s when using 15 kW of microwave power. Lower powers in this type of cavity were found to be less effective. Drop weight tests were used to quantify the change in strength in terms of reduction in required comminution energy. Reductions of up to 40% were achieved for particles of mean size 14.53 mm. Preliminary tests in a single-mode microwave cavity gave strength reductions of 50% at 10 kW of microwave power with a residence time of only 0.1 s, indicating that high electric field strength is important in the failure of ore. A preliminary energy balance indicating the benefits of single-mode heating is presented.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
