Abstract
This study examined the influence of surface preparation and metal primer on the tensile bond strength between cobalt chromium alloy and composite resin. The bond strength between 168 cobalt chromium alloy dumb-bells with one of three test surfaces (beaded, machined or sandblasted) to composite resin were tested. Half of each group were treated with metal primer. The weakest bond strength was produced by the unprimed machined surface, many specimens failing before testing. The metal primer increased the bond strengths of all groups tested. The greatest bond strengths were achieved with the primed beaded and sandblasted surfaces. Within the limits of the study it has been shown that the surface preparation of the cobalt-chromium alloy did influence tensile bond strengths with composite resin and Metal Primer II increased the tensile bond strengths for all groups tested. The sandblasted surface treated with Metal Primer II is recommended for the bonding of composite resin to cobalt chromium alloy.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: The European journal of prosthodontics and restorative dentistry
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
