An investigation for reducing combustion instability under cold-start condition of a direct injection gasoline engine

Abstract

In order to meet recent stringent emission regulations, the exhaust catalyst should be heated as early as possible to activate the purifying reactions. In a direct injection spark-ignition engine, a combination of late fuel injection during the compression stroke and late ignition in the expansion stroke is a common strategy to quickly raise exhaust gas temperature for subsequent rapid activation of exhaust catalysts. However, this approach under cold start-up of an engine often results in incomplete and unstable combustion. In this study, to explore the conditions of stable ignition and combustion, the effect of injection timing on indicated mean effective pressure and early combustion duration (MBD0.5) are first investigated by an analysis of the pressure indicator diagram. As this analysis shows a strong correlation between indicated mean effective pressure and MBD0.5, the mechanism of initial flame propagation is investigated intensively using optical diagnostics. Namely, mean equivalence ratio of mixtures in the propagating flame front is measured by focusing on the ratio of C2* to CH* emission intensities. The flow velocity and turbulence intensity around the spark electrode are measured by the back-scattering laser Doppler anemometry. Two major conclusions are derived from this study: First, when the injection timing is retarded, the mean equivalence ratio increases as the time for the injected fuel to travel and diffuse is shortened. The most preferable mean equivalence ratio for fast initial combustion is found to lie in a range from 1.2 to 1.4. Second, when the second injection timing is retarded further, the mean equivalence ratio increases exceeding 1.4, and this results in slower and more fluctuated initial flame propagation. But, if the turbulent intensity is increased by means of the spray induced air motion, the slowed initial combustion can be recovered.