An Investigation and Quantitative Assessment of Particle Shape in Milk Powders from a Laboratory-Scale Spray Dryer

Abstract

Seven samples of spray-dried milk were prepared using a miniature-scale Buchi Mini Spray Dryer B-290 (diameter 0.5 m, height 1.1 m). For each run, all inlet conditions were held constant except for feed type, inlet solids concentration, and inlet temperature. Skim milk at a solids concentration of 8.8% and whole milk at a solids concentration of 11% were dried at two inlet temperatures, 120 and 200°C. Lactose-free skim milk (8.8% solids concentration) and skim milk at a solids concentration of 41.2% were also dried at an inlet temperature of 200°C to assess the effects of milk feed type and inlet concentration, respectively. Equilibrium between the outlet product moisture content and the outlet gas conditions in the miniature spray dryer was not reached, unlike previous results for pilot-scale and larger dryers, so it appears that, in small (miniature-scale) dryers, the outlet moisture content is limited by kinetics and not by equilibrium. Calculated yields ranged from 10.4 to 82.7%, with whole milk giving significantly lower yields than skim milk, due to the sticky nature of fat found in whole milk. Lactose-free skim milk produced lower yields than skim milk dried at the same conditions, indicating that the lower glass-transition temperatures of the converted lactose sugars make these powders stickier. This sugar effect was not as large as that of the fat content. Comparisons between the SEM images, fractal dimensions, particle size distributions, and bulk densities showed that lower inlet temperatures produced particles of a more collapsed nature with a higher bulk density and lower fractal dimension than milk particles dried at higher temperatures. Also, feed solids concentration heavily influenced the shape of the particles, with high concentrations producing more spherical, less broken or shriveled particles with higher fractal dimensions, as the shell walls are thicker under these conditions. The fractal dimensions appeared to give generally consistent results for quantifying the average particle shapes.