An instrumentation system for multi-parameter measurements of gas-solid two-phase flow based on Capacitance-Electrostatic sensor

Abstract

In this paper, an instrumentation system for the measurements of local solid volumetric concentration, local solid velocity, local solid mass flowrate and solid mass flowrate in gas-solid two-phase flow system is developed. It is based on a new type of a Capacitance-Electrostatic sensor (CES). The CES sensor is mainly composed of a capacitance electrode array and two electrostatic electrode arrays. The optimum design of the sensor is achieved by finite element method. The capacitance electrode array is employed to detect the solid distribution over the cross-section of the pipe, and the local solid volumetric concentration measurement is further derived. The electrostatic electrode arrays are used to measure the local solid velocities in conjunction with cross-correlation method. From the local solid velocity and local volumetric concentration, the solid mass flowrate and the local solid mass flowrate can be achieved. The developed system for the local solid volumetric concentration measurement is verified through analogue simulation experiments and static experiments. Finally, the system is employed to measure the local solid volumetric concentration, local solid velocity, local solid mass flowrate and solid mass flowrate on a belt conveyor. The experimental results show that the measurement error of the local solid volumetric concentration measurement results are less than 10.43% for solid local volumetric concentration ranging from 0.02 to 0.56, the standard deviations of the local solid velocity measurement results are less than 0.42 for solid velocity ranging from 3.5 m/s to 15.0 m/s, and the relative error of the solid mass flowrate is within −19.6% to +14.9% for solid mass flowrate ranging from 0.006 kg/s to 0.103 kg/s, indicating that the system is capable of achieving multi-parameters measurement in gas-solid two-phase flow system.