Abstract
Magnesium (Mg) alloys are gaining prominence in the bio-implantation process due to their low weight, high strength, greater compatibility and ease of biological degradability. However, poor strength and rapid degradation in the physiological environment inhibit their application as implant material. The present experimental investigation examines the effect of Zirconium oxide (ZrO2) reinforcement on mechanical and corrosion behaviors of Mg - Tin (Sn) alloy composites, for assessing their feasibility in the targeted field. Mg-5%ZrO2, Mg-1%Sn, and Mg-1%Sn/5 % ZrO2 were fabricated via ultrasonic aided squeeze casting (UASC) process. Characterization studies on the synthesized composites were carried out to evaluate their morphology using SEM with EDAX and XRD. Mechanical properties were evaluated using micro-hardness and compression tests. Furthermore, the corrosion behavior was determined using Tafel and electrochemical impedance spectroscopy (EIS). The results revealed that the Mg alloy bio-composite (Mg-1%Sn/5 % ZrO2) exhibits better compression (291.2 MPa) and yield (215.3 MPa) strength, elastic modulus (55.7 GPa), hardness (941.4 MPa) and reduced corrosion rate (0.475 mm/yr) than the base Mg and non-reinforced Mg bio-composite (Mg-1% Sn). Overall, the newly synthesized ZrO2 reinforced Mg bio-composite would potentially be used as a bio-implantation supportive material in bone fracture related treatments.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
