An insight into the influence of precipitation phase on the surface quality in diamond turning of an Aluminium alloy

Abstract

Diamond turning is an effective technology for processing metal mirrors used in photoelectric communications, radar, and other fields. In diamond turning, the precipitated phase is an essential factor that influences the surface quality of the metal mirrors. However, in previous studies, the precipitation phase has typically been handled as a random variable in a surface morphology model to evaluate its influence on the surface roughness, instead of determining the formation mechanism and proposing suppression solutions. In this study, a new phenomenon is observed in the diamond turning of metal mirrors, that is, the micro diamond tool can reduce the protrusion of the precipitated phase under a small feed rate and improve the surface quality. Investigating the turning process using diamond tools with varying tool nose radii at small feed rates (<1 μm/r), the underlying transformation mechanism of the precipitation phase is determined with the advanced material characterization technologies. The growth of the precipitated phase with an increase in the tool nose radius is explained using the energy gradient theory. The results showed that the increased material strain on the machined surface decreased the activation energy of solute diffusion in the material, causing solute accumulation and precipitate phase growth. With a further increase of tool nose radius to around 1000 μm, the β'' phase breaks and rotates. The representative volume element method shows that when undergoing severe plastic deformation, dislocations and grain boundaries quickly aggregate and slide on the precipitated phase, which will lead to the fracture and rotation of β'' phase. These findings provide a theoretical basis for the development of highly smooth mirrors.