Abstract
Implant-supported restorations have gained popularity in modern dentistry, and the choice of abutment material is crucial for their long-term success. This in vitro study aimed to evaluate the fracture resistance and failure mode of implant-supported restorations using different abutment materials. Ninety standardized implant-supported restorations were included in the study. Abutments made of titanium, zirconia, and a hybrid material (titanium base with a zirconia veneer) were evaluated. Standardized abutments were fabricated, and screw-retained restorations were fabricated using a resin-based composite material. Cyclic loading was applied using a universal testing machine to simulate masticatory forces. Fracture resistance was measured in terms of the number of cycles to failure (NCF), and failure modes were analyzed. The findings indicate that zirconia abutments exhibited higher fracture resistance compared to titanium and hybrid abutments. Longer implants demonstrated higher fracture resistance, suggesting improved stability and resistance to mechanical forces. Increased loading angles resulted in decreased fracture resistance of implant-supported restorations, emphasizing the need for proper occlusal adjustment. Central loading showed higher fracture resistance than lateral and posterior loading locations. The distribution of failure modes varied among the abutment materials, with bulk prosthesis fracture being the most common in the titanium group, while abutment fracture was predominant in the zirconia and hybrid groups. This in vitro study demonstrated that the choice of abutment material significantly influenced the fracture resistance and failure mode of implant-supported restorations. Zirconia abutments exhibited the highest fracture resistance, followed by hybrid and titanium abutments. The failure mode analysis revealed different patterns of failure for each abutment material.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
