Abstract

PurposeAn improved simulation model of switched reluctance motor (SRM) for steady-state operation that considers the core losses in the stator and rotor is established to obtain the steady performance of the high-speed SRM during the design, analysis and control of SRM driving system more accurately.Design/methodology/approachThe transient core loss model for the material and SRM is presented. Then a new method for calculating the flux density of the motor in real time is introduced, and a steady-state simulation model of the SRM including real-time transient core losses calculation model is established according to the transient flux density. Because the transient core losses calculated by above method are the total core losses of the motor, a core losses distribution method is proposed and the steady-state simulation model of the SRM including the distributed core losses’ effect on the phase winding is established.FindingsThe comparison results show that the proposed model has higher accuracy than the traditional model, excluding core losses, especially at the moments when phase voltage is turn-on and turn-off. The proportion of the core losses to the motor losses increases with the increase in speed. So, the core losses’ effect on the steady-state performance of the high-speed SRM cannot be ignored.Originality/valueThe method to obtain flux density in the real time is presented and the improved steady-state simulation model of SRM that considering transient core losses is proposed.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.