Abstract
<span lang="EN-US">A circularly polarized microstrip patch array antenna using both-sided microwave integrated circuit (MIC) technology with a triple feed network has been proposed in this article. The antenna elements, feed structure and both-sided <a name="_Hlk112828933"></a>MIC technology are used and arranged in such a way to obtain circular polarization alongside high gain without using an external matching circuit. The 50 Ω microstrip line is used to energize the antenna where the antenna’s total feed network is made up of both series and parallel combinations of microstrip and slot line. The antenna was realized using Teflon glass fiber substrate </span><em><span lang="EN-US">(ε<sub>r</sub>)</span></em><span lang="EN-US">=2.15 with a thickness of 0.8 mm. The antenna has some splendid parameters including S<sub>11</sub> of less than -35 dB, a gain of 12 dBi with an omnidirectional pattern and an axial ratio of 0.7 dB at the operating frequency. The antenna possesses a bandwidth of 430 MHz (4.22%) after operating at X-band in the frequency spectrum. The antenna’s simulated parameters were investigated with the help of advanced design system (ADS) simulation software in microwave momentum mode.</span>
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Electrical and Computer Engineering (IJECE)
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
