An Impact-Control Study to Assess the Potential Accumulation of Metals and Metalloids from Sewage Effluent and Biosolids to Sydney Rock Oysters, Saccostrea glomerata

Abstract

Sewage effluent has been identified as a potential source of metal(loid) contamination in the aquatic environment. The Sydney rock oyster, Saccostrea glomerata, can accumulate most metals and is well established as a biomonitor of metals in the marine environment. To determine if Burwood Beach wastewater treatment works (WWTW) is a source of metal(loid) contamination, S. glomerata was deployed for 6 weeks in effluent receiving waters (Burwood Beach near and Burwood Beach far) and at reference locations (Redhead, Fingal Island 1 and Fingal Island 2) at depths 4, 8 and 12 m. In dried oyster tissue, inductively coupled plasma mass spectrometry (ICPMS) was employed to measure concentrations of a suite of metal(loid)s including aluminium, arsenic, cadmium, copper, lead, iron, manganese, mercury, nickel, selenium, silver and zinc. It was found that for all metal(loid)s, S. glomerata tissue concentrations were not significantly higher at Burwood Beach locations in comparison to all reference locations. Concentrations of metal(loid)s were similar to those which have been detected in previous studies of background locations in New South Wales (NSW). Further, all metals fell below National Food Authority maximum residue levels (MRLs), except for arsenic and this does not appear uncommon for concentrations in biota within NSW. Comparisons to historical data suggested that concentrations of metal(loid)s in sewage effluent from Burwood Beach WWTW, assessed via concentrations in oyster tissue, are similar or lower, suggesting that changes in treatment processes initiated in the intervening time have lowered metallic inputs.