An extensometer for global measurement of bone strain suitable for use in vivo in humans

Abstract

An axial extensometer able to measure global bone strain magnitudes and rates encountered during physiological activity, and suitable for use in vivo in human subjects, is described. The extensometer uses paired capacitive sensors mounted to intraosseus pins and allows measurement of strain due to bending in the plane of the extensometer as well as uniaxial compression or tension. Data are presented for validation of the device against a surface-mounted strain gage in an acrylic specimen under dynamic four-point bending, with square wave and sinusoidal loading inputs up to 1500 μ ε and 20 Hz, representative of physiological strain magnitudes and frequencies. Pearson's correlation coefficient ( r) between extensometer and strain gage ranged from 0.960 to 0.999. Mean differences between extensometer and strain gage ranged up to 15.3 μ ε. Errors in the extensometer output were directly proportional to the degree of bending that occurs in the specimen, however, these errors were predictable and less than 1 μ ε for the loading regime studied. The device is capable of tracking strain rates in excess of 90,000 μ ε/s.