Abstract
Aiming at the problem of water burst plugging in karst pipelines, in this paper, a new type of waterborne epoxy resin magnetic self-polymerization grouting material (WEMS) suitable for karst pipeline water burst plugging was developed, and a visual simulation test device for karst pipeline water burst grouting plugging was designed and built. Through the orthogonal test of grouting plugging, the influence of different factors on the effect of grouting plugging was analyzed, and the shear mechanism of magnetic slurry magnetization plugging was also analyzed. The results showed that (i) the best grouting sealing performance was achieved when the new WEMS had a water–cement ratio of 0.35–0.55 and Fe3O4 powder misery of 20–40%. (ii) The primary relationship between the factors affecting the dynamic water flow rate and slurry retention is Fe3O4 power ratio > plugging length > water–cement ratio. (iii) The relationship equation was established between the shear strength of magnetic self-polymerizing slurry and the magnetic field strength, blocking length, and slurry ratio.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
