Abstract
AbstractRoll waves commonly occur in overland flow and have an important influence on the progress of soil erosion on slopes. This study aimed to explore the evolution and mechanism of roll waves on steep slopes. The potential effects of flow rate, rainfall intensity and bed roughness on the laws controlling roll wave parameters were investigated. The flow rates, rainfall intensities and bed roughness varied from 5 to 30 L/min, 0 to 150 mm/h, and 0.061 to 1.700 mm, respectively. The results indicate that roll waves polymerize significantly along the propagation path, and bed roughness and rainfall affect the generation and evolution of roll waves. The wave velocity, length and height decreased with bed roughness, whereas the wave frequency increased with increasing bed roughness under fixed flow rate and rainfall intensity conditions. Rainfall increased the wave velocity and wavelength and decreased the wave frequency. The wave velocity, height and wavelength tended to increase with an increasing flow rate. Rainfall promoted the generation of roll waves, whereas bed roughness had the opposite effect. The generation of roll waves is closely related to the Froude number (Fr) and flow resistance. In this experiment, the range of the Reynolds number for the roll waves generated in the laminar region was 142–416, and the range of the flow resistance coefficient was 0.64–4.85. The critical value of the Fr for flow instability in the laminar region was approximately 0.57. Exploring the generation and evolution law of roll waves is necessary for understanding the processes and dynamic mechanisms of slope soil erosion.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have