An experimental study on root-reinforced soil strength via a steel root analogue in unsaturated silty soil

Abstract

AbstractLandslides due to catastrophic weather events, especially heavy rainfall, have risen significantly over the last several decades, causing significant damage and affecting the health and livelihoods of millions of people. Using tree roots to bio-engineer shallow slopes has been proven to be a cost-effective, sustainable measure and thus has gained increasing popularity. As slope failure often occurs under heavy precipitation, it is important to understand the mechanical interactions in the soil matrix surrounding a root to better estimate the reinforcement capacity of a root system, especially as the soil undergoes wetting from drier conditions. However, very few studies of root reinforcements have considered the effects of degree of saturation on behaviour. In this study, steel wires are used as a root analogue to explore the impact of root geometry, soil dilation and soil saturation on the pull-out behaviour of a root and three commonly used unsaturated soil strength models have been used to interpret the pull-out results. It was found that roots with larger diameter did not contribute to additional resistance. Also, a linear relationship between degree of saturation and pull-out strength was identified over a large range of suctions and one of the unsaturated soil strength models seemed to provide a more reasonable interpretation. The results will help future bioengineering slope design by improving the understanding of soil-root interface behaviour, including the effect of root diameter in slippage failure and greater emphasis on the importance of taking degree of saturation into account in unsaturated soil strength models.