Abstract
This study focuses on effectively utilizing the biodiesel extracted from Azolla (third-generation biofuel), which is regarded as a renewable energy source, for fueling diesel engines. Biodiesel is unique due to its increased viscosity and different fatty acid composition, which proved difficult to attain better engine performance with a mechanical type injection system. This study expands on the previous investigation in modifying the fuel system when using Azolla biodiesel by using a common rail fuel injection system with wider injection flexibility. Considering the lack of more engine optimization studies for Azolla biodiesel, a parametric study is conducted by changing the fuel injection pressure in the range between 300 bar and 900 bar for diesel engine fueled by B20 (20% Azolla +80% diesel) blend. The experimental engine study revealed that the physical properties of the fuel adversely affect the in-cylinder combustion, which leads to poor engine performance and higher emissions at lower injection pressure (300 bar) for B20 when compared to diesel. As the injection pressure increases, the fuel atomization and other spray characteristics are enhanced and thereby improve the combustion. The Brake Thermal Efficiency (BTE) for B20 at 900 bar injection pressure is 3% higher than the diesel fuel at 300 bar injection pressure under full load conditions. The HC, CO, and smoke emission in the engine exhaust for B20 at 900 bar injection pressure was reduced by 13.3%, 28.5%, and 12.3%, respectively, when compared to diesel. Overall, this study recommends the operation of Azolla biodiesel blend in diesel at 900 bar fuel injection pressure to attain improved engine characteristics.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have