Abstract
Triaxial tests on the two-phase flow of air and water through fractured granite specimens were performed to discover whether the two-phase fluid flow within rock fractures was laminar or turbulent. The two-phase flow characterization was carried out based on the macroscopic two-phase steady state flow model and the homogeneous steady state flow model. Rock specimens with a single natural fracture (joint roughness coefficient, JRC < 10) were tested using two-phase, high pressure triaxial rig. Experimental results show that the estimated Reynolds numbers for various inlet fluid pressures are well below 1000. The findings of this study reveal that both single and two-phase flow through rock fractures (JRC < 10) can be characterized as laminar flows at moderate inlet fluid pressures. However, for single-phase air flow, an increase in inlet air pressures may result in the formation of turbulent flow.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
