Abstract
The effects of eccentricity on the natural convection heat transfer from a vertical open-ended cylindrical annulus with diameter ratio of 1.63 and aspect ratio of 18:1 have been investigated experimentally. Measurements of transient and steady state wall temperature distributions for different eccentricities were collected to help understand the heat transfer processes and also to serve as benchmarks for the validation of future CFD studies. Particle image velocimetry was used to validate the calculated mass flow rate in the annulus. It was found that, whereas at very low eccentricities there was insensitivity to eccentricity on the overall heat transfer, a diminishing of the heat transfer occurred for higher eccentricities. Plots of the local azimuthal variation of the Nusselt number showed that at low eccentricities heat transfer improved on one side of the annulus but decreased on the other side. The Nusselt number was found to decrease with eccentricity, while the Rayleigh and Grashof numbers had an increasing trend. It was also found that the mass flow rate did not appear to be strongly influenced by varying eccentricity within the experimental range. The Reynolds number was calculated and the flow within the annulus was found to be transitional nearing laminar with increased distance from the inlet.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
