Abstract

Capillary trapping plays an important role in the geological storage of Carbon dioxide (CO2) because of its ability to immobilize a significant fraction of the injected gas. Numerous papers have investigated various factors that affect capillary trapping. Recently, gas-mobility control methods are being investigated through simulation studies, for improving capillary trapping of CO2 in saline aquifers. The results published so far are inconclusive and sometimes conflicting. In this study, a series of laboratory experiments was conducted to investigate and compare the effects of two mobility control methods namely, water alternating gas (WAG) and surfactant alternating gas (SAG), on gas sequestration efficiency. Efficiency was measured by injectivity and residual trapping capacity. The two methods were tested in both vertical and horizontal flow directions using rock samples of varying lithology and permeability. The different gas injection schemes were compared with the continuous gas injection method. WAG method consistently reduced residual gas saturations in all the experiments while SAG method significantly increased residual gas saturation for both horizontal and vertical flows. Comparison of performance of SAG method in horizontal flow with its performance in vertical flow revealed a significant increase in residual gas saturation when applied in vertical flow direction. However, SAG method resulted in decreasing injectivity as the SAG cycles increase while WAG injectivity remained unaffected throughout its cycles except in tight samples. Furthermore, higher residual gas saturations were observed in high permeability rocks compared to tight rocks when subjected to vertical-SAG sequestration method. The possible reasons for such efficiency in the vertical-SAG method are discussed in detail.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.