Abstract
Experimental studies of the elastohydrodynamics of towed flexible cylinders aided by video image processing are reported. A scale model of a prototype hydrophone array has been designed, fabricated, and tested in a speed range of 1.0 to 4.5 m/sec. The experiments were conducted in a 67-m long towing tank. The instrumented flexible member, 12.7 mm in diameter and 13.55 m long, was fixed at the one end and free at the other and was slightly lighter than neutrally bouyant. Three tail drogue configurations were employed. An integral part of the physical model tests was the development and utilization of a microcomputer based video image processing system for model configuration reconstitution. Instability characteristics, tail acceleration spectral densities, lift force due to curvature, and drag coefficients are quantified and discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.