Abstract

The present work reports an experimental study of particle group combustion of pulverized bituminous coal in laminar flow conditions using advanced multi-parameter optical diagnostics. Simultaneously conducted high-speed scanning OH-LIF, diffuse backlight-illumination (DBI), and Mie scattering measurements enable analyses of three-dimensional volatile flame structures and soot formation in conventional (i.e., N2/O2) and oxy-fuel (i.e., CO2/O2) atmospheres with increasing O2 enrichment. Particle-flame interaction is assessed by calculating instantaneous particle number density (PND), whose uncertainties are estimated by generating synthetic particles in DBI image simulations. Time-resolved particle sequences allow the evaluation of the particle velocity, which indicates a PND dependency and interactions between particles and volatile flames. 3D flame structure reconstruction and soot formation detection are first demonstrated in single-shot visualizations and then extended to analyze effects of O2 concentration, PND, and inert gas composition statistically. The increasing O2 concentration significantly reduces local flame extinction and suppresses soot formation in N2 and CO2 atmospheres. Volatile flames reveal higher intensities and lower lift-off heights as O2 concentration increases. In contrast to that, an increased PND leads to earlier flame extinction and stronger soot formation due to the local gas temperature reduction and oxygen depletion. The lift-off height reduces with increasing PND, which is explained by the complex interaction between particle dynamics, heat transfer, and volatile reactions. Slightly stronger soot formation and delayed ignition are observed in CO2 atmospheres, whereas CO2 replacement reveals insignificant influences on the flame extinction behavior. Finally, non-flammability is quantified for particle group combustion at varying PNDs in different atmospheres.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call