Abstract

Carbon dioxide enhanced oil recovery has been considered and tested in unconventional oil reservoirs due to its additional environmental benefits from simultaneous CO2 geological sequestration. However, it will require a proper injection strategy to overcome unfavorable sweep efficiency in CO2 displacement, which is even magnified in unconventional oil reservoirs due to strong heterogeneity caused by natural and artificial fractures. In this study, we investigated three immiscible CO2 injection strategies at reservoir conditions using tight fractured sandstone cores from the Ordos Basin, China: water alternative gas injection, cyclic CO2 injection, and CO2 foam/surfactant alternative gas injection. A pressurization and miscible CO2 injection were then added after each injection strategy to examine the influence of residual liquid distributions on the miscible displacement efficiency after the tested injection schemes. The core plugs with comparable porosity and permeability were selected, and all cores reached a similar recovery factor (∼11%) after primary CO2 flooding. We found that the cyclic CO2 injection had best performance, with the highest incremental and accumulative oil recovery at 23.6% and 32.26%. Its relatively higher sweep efficiency indicated a uniform CO2 distribution at the end of the cyclic injection, which further led to the highest incremental recovery of 4.94% in the following miscible injection. Comparable CO2 storage capacities were observed in the three fractured core samples (12.21%, 12.98%, and 9.71%, respectively) after completing the miscible displacements. In general, cyclic CO2 injection is recommended as an effective CO2 EOR and geo-storage in tight fractured rocks.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call