Abstract
An experimental study and a proposed theoretical solution are conducted in the present study to investigate the ductile/brittle failure mode of reinforced concrete beams strengthened with an external steel plate. The present experimental study has fabricated and tested six steel plate-strengthened RC beams and one non-strengthened RC beam under 4-point bending loads. The proposed theoretical model is then developed based on the observed experimental results to analyze the crack formation, to determine the distance between vertical cracks and to quantitatively predict the ductile/brittle failure mode of plate-strengthened RC beams. The experimental study shows that the failure mode is based on the sliding of concrete along with the external plate. This slip is limited between two vertical cracks, from which the maximum stress in the external steel is determined. Based on comparisons conducted in the present study, excellent agreements of the stresses/strains in soffit steel plates, crack distances, and system failure modes between the current theoretical solution and the previous and present experimental results are observed.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
