Abstract
Laboratory tests have been carried out in order to assess the influence of groove activation and deactivation on the performance of a twin axial groove steadily loaded hydrodynamic journal bearing. Temperature distribution at the oil–bush interface, oil outlet temperature, total oil flow rate, partial oil flow rate (at each groove), and motor consumption were measured for several journal speeds and loads under constant feeding pressure ( pf) and constant feeding temperature ( Tf), at five different loading angles (Γ). In this study, the corresponding groove was deactivated whenever negative oil flow rate was observed in it and results were compared. It was found that the groove deactivation strategy has profound influence on the bearing performance when negative flow rate occurs at one groove, preventing such undesirable effects as lubricant starvation at the loaded region of the bearing. Groove deactivation in the event of negative flow rate may be easily implemented by incorporating a check valve to the feeding system of each groove. Such strategy seems to be highly recommended for the safe operation of bearings subjected to high loads and load angles deviated from 90°.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
