An Experimental Investigation on Mechanical Properties and Failure Characteristics of Layered Rock Mass

Abstract

Layered rock mass is a common rock mass structure with diverse forms and complex mechanical properties. Three types of composite layered rock mass prepared using sandstone and shale can be divided into sandwiched type, interbedded type and superimposed type. The total height of the combined rock mass is 50 mm, which is a cylinder composed of sandstone and shale with a diameter of 25 mm and different thickness. Uniaxial compression tests on sandstone, shale and combined rock mass were performed. The results show that, with the increase in the content of soft components, the compressive strength and elastic modulus of the combined rock mass tend to decrease. The mechanical properties of the superimposed rock mass will be between the two components and close to the soft component in numerical value. The mechanical properties of sandwiched rock mass are obviously affected by the properties of the sandwiched rock. When the content of the components is consistent, interbedded rock mass often shows higher strength and elastic modulus. Compared with other rock mass, interbedded rock mass has more stable mechanical properties. The stress–strain curve can be divided into the compaction stage, elastic stage, plastic development stage and post-fracture stage. The composition content of the rock mass plays a decisive role in the compaction stage. The failure modes are mainly shear failure and tensile failure. With the increase in soft rock content, the failure degree of soft rock is gradually weakened, and the failure modes show a trend from tensile failure to shear failure. The experimental results provide theorical guidance for underground engineering construction.