Year-end Sale % OFF 
Abstract
The grinding temperature in the high speed deep grinding of yttria partially stabilized zirconia was measured using the grindable thermocouple technique. Effects of the grinding conditions, including wheel velocity, feed rate and depth of cut, on the temperature were investigated. It was found that the grinding temperature measured under different grinding conditions varied from 100 to 300 °C when the wheel velocity was smaller than 160 m/s. The temperature could rise to about 800 °C at the wheel velocity of 160 m/s. The enhanced resistance of the air barrier formed around the wheel periphery at the higher velocity to the coolant supply was mainly responsible for the temperature rise.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Machine Tools and Manufacture
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
