Abstract
In the present study, the mixed-mode fracture toughness of an adhesively bonded composite joint system was examined using a variety of linear elastic fracture mechanics (LEFM) based tests. These tests include the mode I double cantilever beam (DCB), mixed-mode asymmetrical DCB (ADCB) and mode II end load split (ELS) test. The joint system was also evaluated using the wide area lap shear (WALS) test that is often employed by the aerospace industry. While lap shear type tests are relatively simple to perform and post-process compared to their LEFM counterparts, the results can often be misleading and are greatly dependent on the overlap length, thickness of substrate and type of fillet. The experimental tests were also simulated using OpenFOAM, a finite volume based software package. Through this combined experimental-numerical approach, a greater understanding of the influence of the peel ply surface treatment and scrim cloth on the behaviour of the WALS test was achieved.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
