Abstract
An experimental and kinetic study of the transesterification of canola oil with methanol for biodiesel production using a novel mesoporous alumina supported potassium (MAK) catalyst was conducted. The mesoporous alumina supported potassium (MAK) catalyst was synthesized via the aqueous phase sol-gel pathway involving the one-pot simultaneous self-assembly of aluminium isopropoxide (Al(i-PrO)3) and potassium nitrate (KNO3). The effect of reaction temperature (from 50°C to 70°C), methanol to canola oil molar ratio (M/O, 6:1–15:1) and catalyst loading (1.0wt%–2.5wt%, relative to the oil) on the biodiesel yield was investigated. The MAK catalyst achieved the highest of 91.9% biodiesel yield under the reaction conditions of: temperature of 70°C, catalyst loading 2.0wt% and M/O 12:1 in 24h. The reaction rate increased with increasing reaction temperature, catalyst loading and M/O under the conditions tested. The kinetics of the transesterification was also determined and a literature kinetic model has been shown to well reproduce the experimental data. The activation energy was found to range from 20.9 to 23.4kJmol−1. The MAK catalyzed transesterification was thought to follow an Eley–Rideal mechanism that the reaction started with methanol adsorption on the active sites of MAK, followed by surface reaction between the adsorbed methanol and triglyceride to yield methyl esters and glycerol.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
