An experimental and crystal plasticity investigation of anisotropic compression behaviour of Mg-Sn-Ca alloy

Abstract

The ductility of Magnesium alloys is often limited due to the strong basal texture. Initial attempts were made to reduce the intensity of the basal textures by adding rare earth(RE) elements. However, owing to the cost and scarcity of RE elements, alloys with calcium and tin were recently introduced. Among them, Mg-2Sn-2Ca alloys are the most promising, with high strength reported in the extruded condition. In this work, we report, for the first time, the mechanical properties of the alloy in the sheet form. In plane mechanical anisotropy in compressive behaviour is studied along with the detailed characterisation of texture, microstructure and the deformation twins in the material. Unlike strongly basal textured Mg alloys, deformation twinning was also observed in samples loaded along the normal direction. Crystal plasticity simulations were performed to confirm the slip and twin activity. Furthermore, a detailed analysis of deformation twins revealed that the so called Schmid twins accommodate strain by both twin growth and slip, whereas the non-Schmid twins accommodate the strain exclusively by crystallographic slip.