Abstract
This work investigates the fire line evolution in canyon fire spread by analytical and experimental means. The purpose is to understand the mechanism of fire spread acceleration associated with eruptive fire in canyon terrain. A symmetrical model canyon is used for experiments, and in each test the fire is initiated by a point ignition using dead pine needles as the fuels. By experimental observations and data, three distinct types of fire line contour are identified under different central slope angles (the angle between the canyon centerline and the horizontal ground), resulting in different variation modes of rate of spread along the canyon centerline. It is found that the trace of fire head deviates from the line of maximum slope for non-zero central slope angles, and such a deviation increases with increasing central slope angle. The fire spread acceleration associated with eruptive fire occurs when the central slope angle reaches a certain critical value. Experimental data confirm that under higher slope conditions, the significant interaction between the two lateral flame fronts induces marked convective heating ahead of the flame front, which is inferred to be the potential mechanisms of eruptive fire in canyon topography. A model analysis further elucidates how the deflection of the trace of fire head, induced by the fire interaction effect, influences the acceleration of fire spread under higher slope conditions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have