Abstract
Precipitated CaCO(3) compounds recovered from pulped waste gypsum using some carbonate and hydroxide-based reagents were evaluated for their utilization in acid mine drainage (AMD) neutralization. The neutralization potentials, acid neutralization capacities and compositions of the CaCO(3) compounds were determined and compared with some commercial CaCO(3). It was observed that CaCO(3) recovered from waste gypsum using Na(2)CO(3) significantly neutralized AMD compared with commercial CaCO(3) and that recovered using both (NH(4))(2)CO(3) or NH(4)OH-CO(2) reagents. Moreover, a higher acid neutralization capacity of 1,370 kg H(2)SO(4)/t was determined for CaCO(3) recovered from waste gypsum using Na(2)CO(3) compared with an average of 721 and 1,081 kg H(2)SO(4)/t for ammonium-based CaCO(3) and commercial CaCO(3) respectively. The inorganic carbon content for the CaCO(3) recovered using Na(2)CO(3) and ammonium-based reagents of 49 and 34% respectively confirmed their observed neutralization potentials and acid neutralization capacities, while energy dispersive X-ray fluorescence suggested absence of major oxide impurities, with the exception of residual SO(4)(2-) and Na(2)O which still requires further reduction in the respective compounds.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
