Abstract
The present study aims to evaluate the power generation system based on the lignite fuel in environmental and economic terms. Three alternative firing cases are examined: 1) raw lignite firing; 2) 30% pre-dried lignite co-firing; 3) 6% biomass co-firing case. The implementation of the life cycle analysis (LCA) methodology proves that the overall environmental footprint can be decreased by as much as 4.5% in the case of pre-dried lignite co-firing, while the lignite mining activities represent about 32% of the total. The implementation of the life cycle costing (LCC) methodology indicates that the total electricity generation cost is decreased by about 0.92 /MWhe in the case of pre-dried lignite co-firing and about 1.22 /MWhe in the case of biomass co-firing. A sensitivity analysis based on the total net electric efficiency, the raw lignite composition, the CAPEX-OPEX of the power plant, the biomass direct fuel cost and the external cost of CO2 was carried out, in order to identify the range of the results depending on the impact of each parameter.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
