Abstract
Abstract A polyacrylonitrile-based carbon fiber brush (PAN-CFB) was electrochemically modified and efficiently used as cathode for H 2 O 2 electrogeneration in electro-Fenton process. H 2 O 2 generation performance and energy consumption for PAN-CFB cathode before and after modification were evaluated and compared. For electrochemically modified PAN-CFB (EMPAN-CFB) cathode, the maximal H 2 O 2 concentration (approx. 80 mg L −1 by 1000 C charge, >90% current efficiency) appeared at −0.4 and −0.5 V vs. SCE, a ca . 500 mV positive shift compared with the pristine one, showing desirable stability without performance decay after 30 cycles utilization. Moreover, the influence of the distance between anode and cathode as well as the electrolyte concentration on the energy consumption for H 2 O 2 generation was investigated, with obviously reduced energy consumption for the EMPAN-CFB cathode. Finally, methyl orange was decolorized via electro-Fenton process using the EMPAN-CFB cathode and rapid color removal was accomplished in 5 min following the pseudo-first-order kinetic model with high correlation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
