Abstract
In this paper, an energy method for flutter analysis of wing using one-way fluid structure coupling was developed. To consider the effect of wing vibration, Reynolds-averaged Navier–Stokes equations based on the arbitrary Lagrangian Eulerian coordinates were employed to model the flow. The flow mesh was updated using a fast dynamic mesh technology proposed by our research group. The pressure was calculated by solving the Reynolds-averaged Navier–Stokes equations through the SIMPLE algorithm with the updated flow mesh. The aerodynamic force for the wing was computed using the pressure on the wing surface. Then the aerodynamic damping of the wing vibration was computed. Finally, the flutter stability for the wing was decided according to whether the aerodynamic damping was positive or not. Considering the first four modes, the aerodynamic damping for wing 445.6 was calculated using the present method. The results show that the aerodynamic damping of the first mode is lower than the aerodynamic damping of higher order modes. The aerodynamic damping increases with the increase of the mode order. The flutter boundary for wing 445.6 was computed using the aerodynamic damping of the first mode in this paper. The calculated flutter boundary is consistent well with the experimental data.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
