Abstract
This paper demonstrates an asynchronous successive-approximation-register (SAR) analog-to-digital converter (ADC) architecture with an embedded passive gain technique for low-power and high-speed operation. The proposed passive gain technique relaxes the noise requirement of the comparator and reuses the existing capacitor DAC in SAR for minimal overhead. An additional time-out scheme is adopted to advance the SAR conversion whenever the comparator takes longer time to resolve, which improves the overall conversion rate. To prove the concept, an 11-bit ADC prototype was fabricated in 65 nm CMOS technology. The prototype measured a peak effective number of bits (ENOB) of 10.2 and a spurious-free dynamic range (SFDR) of 75.2 dB at a 95-MS/s sampling rate with 1.36-mW power consumption from a 1.1 V supply. The measured static differential nonlinearity (DNL) and integral nonlinearity (INL) were less than ± 0.84 LSB with a differential input swing of 1.6 $\mathbf{V}_{\boldsymbol{pp}}$ .
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IEEE Transactions on Circuits and Systems I: Regular Papers
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.