Abstract
A voice-band continuous-time filter is described which was designed based on the technique of fully balanced networks and was fabrication in a 3.5-/spl mu/ CMOS technology. The filter implements a fifth-order elliptic low-pass transfer function with 0.05-dB passband ripple and 3.4 kHz cutoff frequency. A phase-locked loop control system fabricated on the same chip automatically references the frequency response of the filter to an external fixed clock frequency. The cutoff frequency was found to vary by less than 0.1% for an operating temperature range of 0-85/spl deg/C. The absolute value accuracy of the cutoff frequency was 0.5% (standard deviation). With /spl plusmn/5-V power supplies the measured dynamic range of the filter was approximately 100 dB.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.