Abstract
Protonic ceramic electrochemical cells (PCECs) have received considerable attention as they can directly generate electricity and/or produce chemicals. Development of the electrodes with the trifunctionalities of oxygen reduction/evolution and nonoxidative ethane dehydrogenation is yet challenging. Here these findings are reported in the design of trifunctional electrodes for PCECs with a detailed composition of Mn0.9Cs0.1Co2O4-δ (MCCO) and Co3O4 (CO) (MCCO-CO, 8:2 mass ratio). At 600°C, the MCCO-CO electrode exhibits a low area-specific resistance of 0.382 Ω cm2 and reasonable stability for ≈105h with no obvious degradation. The single cell with the MCCO-CO electrode shows an encouraging peak power density of 1.73W cm-2 in the fuel cell (FC) mode and a current density of -3.93 A cm-2 at 1.3V in the electrolysis cell (EC) mode at 700°C. Moreover, the MCCO-CO cell displays promising operational stability in FC mode (223h), EC mode (209h), and reversible cycling stability (52 cycles, 208h) at 650°C. The MCCO-CO single cell shows an encouraging ethaneconversion to ethylene (with a conversion of 40.3% and selectivity of 94%) and excellent H2 production rates of 4.65mL min-1 cm-2 at 1.5V and 700°C, respectively, with reasonable Faradaic efficiencies.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
