An efficient solution for fast generation of multi-GNSS real-time products

Abstract

<p>Global navigation satellite systems (GNSS) have been playing an indispensable role in providing positioning, navigation and timing (PNT) services to global users. Over the past few years, GNSS have been rapidly developed with abundant networks, modern constellations, and multi-frequency observations. To take full advantages of multi-constellation and multi-frequency GNSS, several new mathematic models have been developed such as multi-frequency ambiguity resolution (AR) and the uncombined data processing with raw observations. In addition, new GNSS products including the uncalibrated phase delay (UPD), the observable signal bias (OSB), and the integer recovery clock (IRC) have been generated and provided by analysis centers to support advanced GNSS applications.</p><p>       However, the increasing number of GNSS observations raises a great challenge to the fast generation of multi-constellation and multi-frequency products. In this study, we proposed an efficient solution to realize the fast updating of multi-GNSS real-time products by making full use of the advanced computing techniques. Firstly, instead of the traditional vector operations, the “level-3 operations” (matrix by matrix) of Basic Liner Algebra Subprograms (BLAS) is used as much as possible in the Least Square (LSQ) processing, which can improve the efficiency due to the central processing unit (CPU) optimization and faster memory data transmission. Furthermore, most steps of multi-GNSS data processing are transformed from serial mode to parallel mode to take advantage of the multi-core CPU architecture and graphics processing unit (GPU) computing resources. Moreover, we choose the OpenBLAS library for matrix computation as it has good performances in parallel environment.</p><p>       The proposed method is then validated on a 3.30 GHz AMD CPU with 6 cores. The result demonstrates that the proposed method can substantially improve the processing efficiency for multi-GNSS product generation. For the precise orbit determination (POD) solution with 150 ground stations and 128 satellites (GPS/BDS/Galileo/GLONASS/QZSS) in ionosphere-free (IF) mode, the processing time can be shortened from 50 to 10 minutes, which can guarantee the hourly updating of multi-GNSS ultra-rapid orbit products. The processing time of uncombined POD can also be reduced by about 80%. Meanwhile, the multi-GNSS real-time clock products can be easily generated in 5 seconds or even higher sampling rate. In addition, the processing efficiency of UPD and OSB products can also be increased by 4-6 times.</p>