Abstract
The present work explores sorption behavior of calix[4]arene based silica resin to remove α and β endosulfan isomers from aqueous solution. The efficiency of resin was checked through both batch and column sorption methods. In both methods, the sorption parameters, i.e. pH, equilibrium time, shaking speed and sorbent dosage were optimized as 2, 60min, 125rpm and 50mg, respectively. Freundlich and Langmuir sorption isotherm models were applied to validate the sorption process. The data obtained in both models reveal that the sorption is favorable. Column sorption data were analyzed through Thomas model to calculate kinetic coefficient kTH and maximum sorption capacity qo of the resin, which were found to be 6.18 and 5.83cm3mg−1min−1 as well as 1.11 and 1.08mgg−1 for α and β endosulfan, respectively. Kinetics of sorption shows that it follows pseudo second order rate equation. The optimized method has also been applied to real water samples and the results show that calix[4]arene based silica resin is an effective sorbent to remove endosulfan from waste waters.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
