Abstract
The challenge of soot emission persists in combustion research due to the complexities of tracking the crucial stages of growth from fuel to soot nuclei and ultimately mature particles. Studying soot formation in flames often requires a sophisticated approach, involving detailed measurements of gaseous soot precursors and soot particles using multiple complementary diagnostics. On the other end of the spectrum of studies are simpler methods that capture the sooting tendency using a single index, akin to the cetane number in compression ignition engines and the octane number in spark ignition engines. This article seeks a middle ground, aiming to quantify the soot production rate while maintaining the simplicity of single-index characterizations. The approach involves establishing counterflow diffusion flames, measuring soot volume fraction through pyrometry, and accurately computing velocity and temperature profiles using a commercial code. These data allow for the quantification of the production rate from the soot governing equation. The methodology is applied to counterflow ethylene diffusion flames to examine the temperature dependence of the soot production rate across peak temperatures varying by several hundred degrees and pressures in the 1–32 atm range. The soot production rate per unit flame area falls within the range of 10−7–10−3 g/(cm2s) range and, when normalized with respect to the carbon flux, it ranges between 10−6 and nearly 10−2. On a logarithmic scale, it linearly correlates with the peak temperature at a fixed pressure. Although this study deals only with flames of ethylene, the approach can be generalized to any fuel. The resulting database should be valuable not only for industry practitioners but also to the scientific community for the global validation of detailed soot models.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have