Abstract
A laser confocal Fabry-Perot interferometer (CFPI) is described for the sensing of ultrasound in opaque solids having optically rough surfaces. Stabilization was required to eliminate the optical frequency drift arising from various sources in both the CFPI and the argon-ion laser. Measurements showed that conventional proportional control was inadequate when using feedback to the piezoelectrically-controlled interferometer mirror. Instead, a cascade control system was developed with a digital proportional-integral controller as the primary controller and an analogue proportional controller as the secondary controller. Two control loops were nested, with the secondary loop used to stabilize fast fluctuations and the primary loop used to eliminate the drift. When the interferometer mirror reaches the limit of its dynamic range, the intelligent digital controller was able to reset automatically the interferometer at a new operating point within its proper dynamic range. In this way, it is shown that the interferometer sensor can be used in a fully automatic way for on-line monitoring applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.