Abstract
Due to high cost, solar Photovoltaic (PV) systems are not an attractive option for places where energy buyback programs are not available. Mostly because small scale PV systems are incapable of operating legacy high-powered electrical devices such as room air conditioners, induction motors and other compressor-based devices on renewable energy. This is because these devices show either capacitive or inductive behavior which results in a high transient power during their startup cycle, not accommodable by small-scale PV systems. Solutions to solve this problem such as Variable Frequency Drives (VFDs) are expensive and restrictive in their applicability.In this paper, we propose an approach to operate high-powered legacy electrical appliances on small-scale solar PV. Our proposed method involves a real-time algorithm which detects the onset of a transient and shifts the appliances from PV to the utility during the transient duration. Upon reaching back to a stable state after the transient, the device is shifted back to PV. We have evaluated our transient detection algorithm on a two publically available datasets as well as on a specifically designed testbed system. Our evaluations show that for most common high-powered devices, the transients are detected fast enough to shift the load from PV to the grid and vice versa.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.