An approach for predicting the internal behaviour of ball bearings under high moment load

Abstract

This paper presents a modelling approach for predicting the internal dynamic behaviour of ball bearings under high moment loads. This type of loading is a specific feature of helicopter main gear boxes because of special design rules and the high structural flexibility of such systems. The ball bearing model proposed here is not limited to planar systems and incorporates several different phenomena such as contact deformation, elastohydrodynamic contact, internal clearance and cage run-out. The cage–race interaction is treated as a hybrid short journal model, which ensures continuity of the contact force at the transition from the hydrodynamic to metal-to-metal regime. In the dynamic analysis of such a severely loaded bearing, the dependence of the shaft-to-inner-ring force on inner race position cannot be neglected. An equivalent viscoelastic hinge joint has been developed, it produces an additional force that represents the overall rigidity of the system. The stiffness parameters of the joint are identified using global finite element simulations. A ball bearing loaded with two different moments is chosen as an example. Relevant results concerning the internal dynamic behaviour are given. The predicted cage trajectory has been compared to experimental observations, and good agreement has been found.