Abstract
This study aimed to determine the equilibrium moisture content and to develop an indirect measurement technique for the moisture content (MC) by observing temperature and vapor pressure during hot air drying. The temperature and gas pressure were recorded during hot air drying at several points within wood sample specimens conforming to ASTM D 143 and AOAC, 1990. The moisture content was estimated from measured temperature and pressure. The accuracy of MC estimates was validated by oven-drying method. For validation, nine experiments at different temperatures of hot air drying were run and the indirect measurement was found to provide a good accuracy. The obtained statistics were R2 = 82.5%, standard error (SE) ranging from 0.15 to 0.43, root mean square error (RMSE) ranging from 0.16 to 0.38 and mean absolute error (MAE) ranging from 0.4 to 1.1 respectively. It can be concluded that the air in wood was removed completely, especially when the MC was below the fiber saturation point. We have demonstrated an alternative moisture content monitoring method for potential adoption by the rubberwood industries.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
