An apparatus for noncontact measurement of thermal conductivity by thermal radiation heating

Abstract

Thermal radiation calorimetry was applied to measure the thermal conductivity of insulating solid specimens. We consider the system in which a disk-shaped specimen and a flat heater are mounted in a vacuum chamber with the specimen heated on one face by irradiation. A temperature difference between two faces was observed at elevated temperatures under steady-state conditions. An apparatus was developed using a thin graphite sheet as the heater element. Disk-shaped Pyrex glass and Pyroceram specimens, whose surfaces were blackened with colloidal graphite, were used in the measurements. Noncontact temperature measurement was performed using pyrometers and a thermocouple set in the gap between the heater and the specimen. Deviations of the estimated thermal conductivities from the recommended values were about 5% in the temperature range 250 to 800°C.