Abstract
In this paper, the effects of biaxial mean stress, mainly contributed by the weld residual stress, and thermal loading conditions on cracking directions and damage in high cycle thermal fatigue crazing subjected to variable amplitude loadings are investigated by a combined analytical and computational approach. The cracking directions are related to the orientation of the critical plane defined by the maximum damage. Analytical solutions of the critical plane orientation under constant amplitude biaxial tension/compression loadings are first derived and then employed to study the effects of biaxial mean stress on the critical plane orientation. The critical plane orientation appears to strongly depend on the dominant direction defined by the larger maximum stress. The developed analytical solution of the critical plane orientation and the analytical solution of the thermal stress from the literature are employed to study the effects of thermal loading conditions on the critical plane orientation. The critical plane orientation does not seem to significantly depend on the frequency, the amplitude and the mean value of the fluid temperature fluctuations, and the heat transfer film coefficient between the fluid and the pipe wall. The critical plane orientation under variable amplitude loadings is also studied, and an approximate solution is proposed for convenient engineering applications. The critical plane orientations are used to partially explain the observed cracking directions in the high cycle thermal fatigue crazing in the old residual heat removal system of a nuclear power plant. Finally, the effects of biaxial mean stress and thermal loading conditions on the fatigue crack initiation life are discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have