Abstract
Abstract This paper proposes a new Matlab-developed algorithm for automatic recognition of digital modulations using the constellation of states. Using this technique the automatic distinction between four digital modulation schemes (8-QAM, 16-QAM, 32-QAM and 64-QAM) was made. It has been seen that the efficiency of the algorithm is influenced by the type of modulation, the value of the signal-to-noise ratio and the number of samples. In the case of an AWGN noise channel the simulation results indicated that the value of SNR (signal-to-noise ratio) has a small influence on the recognition rate for lower-order QAM (8-QAM and 16-QAM). The length of the signal may change essentially the recognition rate of this algorithm especially for modulations with a high number of bits per symbol. Consequently, for the 64-QAM modulation in a case of 25dB signal-to-noise ratio the recognition rate is doubled if the sample rate is incresed from 5400 to 80640.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International conference KNOWLEDGE-BASED ORGANIZATION
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.