Abstract

Maloperation of conventional relays is becoming prevalent due to ever increase in complexity of conventional power grids. They are dominant during power system contingencies like power swing, load encroachment, voltage instability, unbalanced loading, etc. In these situations, adaptive supervised wide-area backup protection (ASWABP) plays a major role in enhancing the power system reliability. A balance between security and dependability of protection is essential to maintain the reliability. This paper proposes multi-phasor measurement units (MPMU) based ASWABP scheme that can function effectively during faults besides power system contingencies. MPMU is an extended version of Phasor Measurement Unit (PMU). It is an intelligent electronic device which estimates the synchronized predominant harmonic phasors (100Hz and 150Hz) along with the fundamental phasors (50Hz) of three phase voltages and currents with high precision. The proposed ASWABP scheme can detect the fault, identify the parent bus, determine the faulty branch and classify the faults using MPMU measurements at System Protection Center (SPC). Based on these MPMU measurements (received at phasor data concentrator (PDC) at SPC) the appropriate relays will be supervised to enhance the overall reliability of the power grid. Numerous case studies are conducted on WSCC-9 bus and IEEE-14 bus systems to illustrate the security and dependability attributes of proposed ASWABP scheme in MATLAB/Simulink environment. Also, comparative studies are performed with the existing conventional distance protection (Mho relays) for corroborating the superiority of the proposed scheme regarding security and dependability. Comparative studies have shown that the proposed scheme can be used as adaptive supervised wide-area backup protection of conventional distance protection.

Highlights

  • The ever-increasing demand for electricity causes conventional power grids to operate at their maximum operating limit

  • Major research works rely on phasor measurement unit (PMU) based wide area measurement system (WAMS) and wide area protection system (WAPS) [12,13,14,15,16,17]

  • 4 Results and discussions In general practice, for the traditional backup protection of long transmission lines, conventional distance relays are employed with over-reaching zones [30]

Read more

Summary

Introduction

The ever-increasing demand for electricity causes conventional power grids to operate at their maximum operating limit. When the system is under such stressed condition, the occurrence of a static phenomenon like load encroachment or dynamic phenomena like power swings may result in maloperation of distance relays [1,2,3,4,5]. This paves the way for fairly reduced security in power system protection. Inordinate research attention is being received towards synchrophasor measurements based backup protection methods for transmission lines. WAMS and WAPS incorporated in backup protection systems were named

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call