An 18.3 MJ charging and discharging pulsed power supply system for the Space Plasma Environment Research Facility (SPERF): The subsystem for the magnetopause shape control coils.

Abstract

The Space Plasma Environment Research Facility currently under construction at the Harbin Institute of Technology in China uses four magnetosheath coils (flux cores) and a dipole coil to generate the magnetic field required for the study on the magnetopause magnetic reconnection. Two groups of magnetopause shape control coils (labeled CK coils) are used to slightly adjust the magnetic field distribution on the magnetopause. A capacitive pulsed power supply (PPS) system with a modular design is developed to excite CK coils. The PPS system consists of six sets of PPS with the same principle and structure, which are used to excite six sub-coils of the CK coils, respectively. Each set of PPS consists of ten modules and one local controller, and each module consists of a charger and discharge unit. Each set of PPS can provide a pulsed current of no less than 400 kA for the corresponding sub-coil at 0.11ms when the charging voltage is 20 kV, and the duration of the pulsed current from the peak to 10% of the peak is no more than 0.6ms. The detailed design of the PPS is discussed in this paper, and the discharge test of the PPS is carried out to verify the design of the PPS. Because there are acquisition and control devices in the discharge unit, the electromagnetic interference immunity design is also discussed to ensure the normal operation of the PPS.